Bareknuckle Welterweight - Airless Paint Sprayer
OPERATING INSTRUCTIONS & SAFETY MANUAL
Bareknuckle Welterweight - Airless Paint Sprayer
OPERATING INSTRUCTIONS & SAFETY MANUAL
|
14 |
15
Clean Sprayer immediately to prevent permanent damage.
Clean Sprayer immediately to prevent permanent damage.
15
16
16
16
16
16
16
16
16
15
15
15
15
15
15
15
15
CLEANING
1. Relieve pressure and drain
paint from tube.
9. Change to waste bucket as
paint thins.
13. Remove trigger guard from
housing.
2. Separate tubes.
10. Turn to Prime mode.
14. Unscrew nut.
6. Turn to Spray mode.
3. Place Priming Tube in empty
waste bucket.
11. Continue to flush until clear.
15. Remove filter.
4. Submerge Suction Tube in
water or flushing fluid.
12. Release trigger, turn power off
and relieve pressure.
16. Clean all parts in warm, soapy
water or flushing fluid with a
bristled brush.
5. Unthread spray tip and remove.
7. Switch power to on.
8. Spray paint into paint pail.
Returns not accepted & warranty void if sprayer is
not properly cleaned immediately after every use.
Returns not accepted & warranty void if sprayer is
not properly cleaned immediately after every use.
