15
before starting the tractor's engine, make sure all controls are in neutral position
before you engage the PTO, check that the fan protection network is present and
well fixed and that the gearbox is in neutral position.
Keep always clean the area of movement of the impeller, removing foreign objects
both outside and inside the security network.
do not commute with the impeller running outside of those necessary for spraying
pay attention for any person or animal is closer to the fan when this is running.
After the PTO disengagement, moving elements can still turn a few seconds. Do not
approach until it stops.
1.8.1
PLANT PROTECTION PRODUCTS
Spraying is a delicate operation and involves substantial risk of contamination of people,
animals and the environment. It is very important to treat the functionality of all the parts of
sprayer;
The operator is always the subject more exposed to chemicals used and must work using
all measures necessary for his safety;
It is important to operate under the right weather conditions and inquire about the weather
for the entire period of application;
measure accurately the doses of pesticides to enter in the main tank;
Make sure that the chemicals used are compatible with the materials of construction of the
atomizer;
Never leave chemicals in the tank for more than a few hours;
Carefully follow the rules of detention and use of plant protection products on the market
and ensure that people and animals cannot touch them;
Before each treatment, thoroughly wash the containers of chemical liquid/powders
Do not use the machine without water tank for hand washing or if the same is not
completely fill up;
It is advisable to clean the machine at the same place in which you perform the fills or in a
square where the waters are collected in a pit for disposal;
Avoid uncontrolled discharge of mixing waste on streams, sewers and public areas;
