43
6
CONNECTION OF THE MACHINE
6.1 TO THE TRACTOR
The machine must be coupled to the tractor with power outlet 1
” 38 ASAE DIN 9611A at
550 RPM considering the right weight and power, in conformity with the requirements of
the law in force in the country of use.
6.1.1 MOUNTED SPRAYERS MODELS PROCEDURE
To coupling the tractor to the machine, the operator must bring the tractor in reverse and
positioning it in front of the sprayer to be able to lift it up with the rear lifting arm
Operate the tractor parking brake, stop the engine, remove the ignition key on and go
down to inserting the bolts and the safety pins of the sprayers on the lifting arm of the
tractor.
Connect the third point hitch of the machine to the tractor, lift the machine until the
coupling plugs of the machine and tractor are at the same height and adjust the 3PH bar.
Attach the PTO SHAFT to the PTO of the tractor.
Lock up the lifting arms of the tractor, in order to avoid any swing sideways.
6.1.2 TRAILES MODELS PROCEDURE
To coupling the sprayer to the tractor the
operator has to :
-Bring the tractor in reverse until
placing the towbar direct to the
drawbar of the sprayer(see Figure)
Operate the tractor parking brake,
stop the engine, remove the ignition
key on and go do.
-Connect the towbar to the drawbar
of the sprayer by adjusting the
height to maintain the tank in
horizontal way.
-Take off the parking wheel to
prevent damages on it during
operation.
-Connect the PTO SHAFT to the
PTO of the tractor.
