12
1.6 START UP OR RESTART AFTER LONG PERIOD OF INACTIVITY
Before using the machine for the first time or after a long period of inactivity you must do
the following:
check that the machine does not present any damage.
Check that the machine is correctly mounted in its entirely.
Check the mechanical parts, which must be in good condition and not rusted..
Check that the suction filter and tank inside are clean and free of residues.
Check that the connections are mounted correctly by following the basic schema.
check that the tube straps are tight correctly as all fittings and connections..
ensure that the gear box is suitably replenished of lubricant
check that the fan is free to rotate and that the box is not deformed by blows
received during transport..
check and, if necessary, restore the oil level of the pump.
Grease transmissions and mechanical joints.
Ensure the presence and functionality of protective devices.
check the status of the pump and the hydraulic compensating.
make sure that all the nozzles are in good condition, with no obvious signs of wear
and fouling.
check the status of all hoses and replace them if necessary.
check tightness of all bolts of the machine.
Remove the cardan shaft from the machine and lubricate it.
1.7 SCRAPPING
In case of scrapping the machine must be disposed in adapted landfills according to the
current legislation.
Before scrapping it is necessary to separate the plastic or rubber parts, electrical and
electronic material.
Before scrapping the equipment thoroughly washing inside and out. Unloading of washing
compounds in the environment without precautions is banned due to groundwater
pollution.
Recover any waste oil and dispose of it in the special collection centers.
used oil must be properly recovered and must not be dispersed in the
environment, because, according to the current regulations, is classified
as hazardous waste and it should be awarded to special collection
centers.
For the collection of waste oil, it is mandatory to consult the local norms of Oils residual.
The parties constituted only by plastic, aluminum, steel, can be recycled.
