Figure 1: Theoretical wire lengths and trap arrangement.
Figure 3: Temporary hookup
for tuning. Loosely twist and
tape ends in.
Figure 2: Permanent hookup. After passing
through the eybolt, wrap the wire around itself
5 times before soldering to the terminal.
WARRANTY STATEMENT
Barker & Williamson guarantees each product to be free from defects in material and workmanship for 90 days from date of
purchase. The warranty applies to the original purchaser only, and we will repair or replace the product at our discretion. Under
no circumstances will Barker & Williamson be liable for any damages or consequential damages arising from use or misuse of
our products. Warranty is voided if product is subject to misuse, neglect, accident, improperly installed or used in violation of
the instructions furnished by us. We reserve the right to make changes in design at any time without obligation to update
previously manufactured models. This warranty is given in lieu of any other warranty, expressed or implied.
Figure 4: Typical SWR curves with antenna installed as an inverted
Vee, with center 30 feet high and ends 10 feet above ground.
