background image

2

IMPORTANT: READ PRIOR TO INSTALLATION

It is the responsibility of the consumer to read and follow the proceeding information. 

          

 WARNING:

1. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN FIRE OR 

EXPLOSION, WHICH COULD CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR 

DEATH.

2. IMPROPER INSTALLATION OR MAINTENANCE OF THIS PRODUCT MAY RESULT IN 

DAMAGE TO PROPERTY, INJURY OR DEATH. 

3. Read the installation, operation and maintenance instructions thoroughly before 

installing or servicing this equipment.

Barkman Concrete Ltd. is not liable for any property damage or bodily injury caused 

by failure to follow the installation instructions, improper use of the product or any 

negligence or carelessness of the consumer.

INSTALLATION AND USE:

1. Improper installation, adjustment, alteration, service or maintenance can cause injury, 

or property damage. Read the installation instructions thoroughly before installing the 

fireplace.

2. DO NOT TOUCH AREAS IF FIRE IS BURNING, SEVERE BURNING MAY RESULT. 

CLOTHING IGNITION MAY RESULT.

3. Carefully supervise children near the fireplace.

4. Keep clothing, furniture, draperies and other combustibles away from the fireplace.

5. Fireplace is for outdoor use only. Place the fireplace in an area where wind won’t 

disturb the flames.

6. DO NOT OBSTRUCT THE OPENING OF THE FIREPLACE, OR OTHERWISE 

OBSTRUCT THE FLOW OF AIR. 

7. FIREBOX-RELATED FIRE CAN OCCUR WHEN THERE IS A FAILURE TO MAINTAIN 

THE REQUIRED CLEARANCES (AIR SPACES) TO COMBUSTIBLE MATERIALS.

8. Certain steps in the installation process will require more than one person.

9. Curing is crucial to the operation of your fireplace. Ensure to follow the direction on 

page 14 of the instruction guide. 

10. Plan to install the fireplace a week before intended use to allow enough time for the 

curing process.

Summary of Contents for oasis

















Reviews: