13-9
®
INSPECT & SERVICE SCHEDULE
(continued...)
Reservoirs & Fitting-
check
for leaks
X
Hydraulic Oil-
check level,
visually inspect oil quality
X
Hydraulic Tank Breather-
inspect
X
replace if defective
Hydraulic Oil Filters &
Elements-
replace
X X
replace after first 100 hrs and
every 500 hrs thereafter
Hydraulic Oil-
change
X
Hydraulic Tank Breather-
replace
X
X
whichever comes first
80
Options
70
Reservoir-
Hydraulic &
Fuel
All Componets-
check of
wear, leaks, loose fittings,
etc.
X
Final Drive Mounting Bolts-
check torque
X
check after initial 50 hours
Final Drive Gear Oil-
check
level
X
add fluid if necessary
Final Drive Gear Oil-
change
X X X
change every 300-1000 hours
for conventional oil, 1000-2000
hours for synthetic
All Components-
clean and
inspect
X
Batteries-
check, secure and
clean
X
Gull Wing Door Pump
Reservoir-
check oil level
X
add fluid if necessary
50 Shrouding
46 Lower Frame
***see Side Frame Service Section in Chapter 46 for ALL inspection and service information***
Daily
50 Hours
100 Hours
500 Hours
1000 Hours
2000 Hours
4500 Hours
5000 Hours
Yearly
2
Years
3
Years
4
Years
INTERVAL
NOTES /
INSTRUCTIONS
CHAPTER REF
LOCATION
/ SYSTEM
INSPECTION &
SERVICE REQUIRED
07/26/2018
Updated
OPERATOR’S
Summary of Contents for 295B
