Pump continues to
run whit the electric
probe remains
submerged.
When the water
surface falls below
the electric probe,
timer starts to count
about one minute.
Pump stops in about
one minute after the
water level falls.
When the water level
rises to contact the
electric probe, pump
starts operating
again.
El proceso se repite
If the water capacity of the pit is small,
in order to avoid frequent start-ups, a
rubber ball check valve should be
installed at the outlet junction. Also
move the electrode up as far as possible.
Control automático
14
3. Prior to use
3.1 Inspect the product
1.
lnspect the package for damaged or missing items upon delivery.
2.
Unpack and verify that no damage has occurred during shipment and that bolts and nuts have not loosened.
3.
File a claim with the shipping company if anything is out of order.
NOTICE
If the product has been picked up at a distributor, make a claim directly to the distributor.
3.2 Inspect the specifications
Check the nameplate of the pump unit to verify that it is the product that you have ordered. Pay particular attention to its
voltage and frequency specifications.
NOTICE
If you discover any damage or discrepancy, please contact with the BARMESA dealer from whom you
purchased the product or the nearest manufacturer representative office.
3.3 Product specifications
CAUTION
Do not use the product under conditions other than those specified. Doing so may lead to short, electrical
shock or fire, or might inhibit the product from attaining its full potential.
3.4 Starting method
Direct-on-line start.
barmesapumps.com
Summary of Contents for 2KTM201
Page 42: ......
