30
2.
Press the UP or DOWN arrow to select “M
Ω
-cm”
or “uS/cm” Press ENTER.
3.
Press BACK to return to the normal recirculating
mode.
Temperature Compensation
(Factory set to “ON.”)
1.
From the normal recirculating mode, when the
display is showing purity, press the Up or
DOWN arrow until the display reads,
“Temperature Compensation?” Press ENTER.
2.
Press the UP or DOWN arrow to select “OFF”
or “ON” Press ENTER.
3.
Press BACK to return to the normal recirculating
mode.
U
SER
S
ETTINGS
Note
Purity displayed will have an asterisk
(*) the the left of the reading (* xx.x
M
Ω
-cm or * x.xx uS/cm) to inform the
user that uncompensated purity is
being displayed.
