35
capture text. Accepting default will put the file
which you name in the c:/windows directory
called capture.txt and the file will be an ASCII
text file.
11.
You should see the data on the computer
screen.
12. When you are finished storing data from the
NANOpure DIamond, save your file. You can
exit Hyperterminal or set up a new experiment.
13. Hyperterminal data can be manipulated and
graphed in Excel
®
.
Procomm
1.
Connect the 9 pin serial cable from the
NANOpure DIamond RS-232 port to COM2: port
or (COM1: port) on back of computer.
2.
From the (Idle) display, press the UP or DOWN
arrow until the display reads, “Advanced Menu.”
3.
Press ENTER.
4.
From the “Printer Attached” display. Press the
Up or DOWN arrow for (NO).
5.
Press ENTER.
6.
The unit will now, during the normal
Recirculation mode send a purity and tempera-
ture reading to the computer once per minute.
7.
Open DOS window and change directory to pro-
comm directory.
8.
Open procomm executable.
9.
Press ALT-F10 for configuration screen.
10. Enter into Line Settings screen by typing ALT-P.
11.
Type in 11 <Enter>, sets parameters as 9600, 8,
N, 1.
C
OMPUTER
/P
RINTER
S
ETUP
