27
Caring For Your EASYpure RO
With proper care, your EASYpure RO will give
you consistently pure water. To ensure contin-
ued good service, regularly perform the follow-
ing procedures.
System Sanitization
The frequency of sanitizing depends on the
rate and amount of contamination buildup.
The membrane cartridges
must
be removed.
The EASYpure RO can easily be completely
sanitized by utilizing the sanitization cartridge
(Part Number D50245). To accomplish this, fol-
low these step-by-step instructions:
1.
Turn off the EASYpure RO. Turn off
an EASYpure unit or NANOpure fed
by the EASYpure RO. Depressurize
the EASYpure unit or NANOpure by
opening the drawoff valve (auxiliary
drawoff on NANOpure) and allowing
water to flow until no more exits the
unit. Disconnect the EASYpure unit or
NANOpure from the power supply.
2.
Close the inlet valve on the
EASYpure unit. Disconnect from the
EASYpure RO the tubing attaching
the EASYpure RO to the EASYpure
unit. Disconnect this same tubing
from the EASYpure unit. Direct one
end of the tubing to drain. Reattach
the other end to the EASYpure RO.
Allow the tank to drain.
Maintenance
Warning
Disconnect from the power
supply prior to maintenance
and servicing.
Refer servicing to qualified
personnel.
Ensure all piping connections
are tight to avoid leakage of
chemicals.
Ensure adequate ventilation
when using chemicals for
cleaning.
Follow carefully the manufac-
turers’ safety instructions on
labels of chemical containers
and Material Safety Data
Sheets (M.S.D.S.).
