Your Barnstead|Thermolyne NANOpure DIamond
Analytical ultrapure water system has been designed with
function, reliability, and safety in mind. It is your responsi-
bility to install it in conformance with local electrical
codes. This manual contains important safety information.
You must carefully read and understand the contents of
this manual prior to the use of this equipment. For safe
operation, please pay attention to the alert signals
throughout the manual.
Water purification technology employs one or more of the
following: chemicals, electrical devices, mercury vapor
lamps, steam and heated vessels. Care should be taken
when installing, operating or servicing Barnstead
products. The specific safety notes pertinent to this
Barnstead product are listed below.
Warnings
To avoid electrical shock, always:
1.
Use a properly grounded electrical outlet of
correct voltage and current handling capacity.
2.
Do not locate the NANOpure DIamond
Analytical directly over equipment that requires
electrical service. Routine maintenance of this
unit may involve water spillage and subsequent
electrical shock hazard if improperly located.
3.
Replace fuses with those of the same type and
rating.
4.
Disconnect from the power supply prior to main-
tenance and servicing.
To avoid personal injury:
1.
Do not use in the presence of flammable or
combustible materials; fire or explosion may
result. This device contains components which
may ignite such materials.
2.
This device is to be used with water feeds only.
Sanitizing/cleaning agents must be used in com-
pliance with instructions in this manual. Failure
to comply with the above could result in
explosion and personal injury.
3
Safety Information
Caution
Cautions alert you to a possibility of
damage to the equipment.
Warning
Warnings alert you to a possibility of
personal injury.
Note
Notes alert you to pertinent facts and
conditions.
Alert Signals
