34
7.
From the “Printer Attached” display, press the
Up or DOWN arrow for (YES).
8.
Press ENTER. Press BACK twice to return to
the (Idle) mode.
9.
During normal Recirculation mode, a purity and
temperature reading will be printed once every
12 minutes.
Printer Setup
Power Switch
Located on the front of the printer (AY1137X1), this switch
turns power to the printer ON and OFF. (See Figure A.)
The green POWER light will illuminate when the printer is
ON.
Paper Feed Button
Press this button once to advance the tape one line, or
hold the button down to advance paper continuously.
When the paper roll nears the end, the red PAPER OUT
light will illuminate.
If the red ERROR light illuminates, the printer is off line.
This could be a result of the print head being too hot, in
which case the printer will resume printing once it cools
C
OMPUTER
/P
RINTER
S
ETUP
Figure B: Control Panel
Paper Feed Button Paper Out Light
Error Light
Power Light
Figure A: Printer
ON/OFF Button
