Setting System Options
See procedures in the table below to choose system
options.
Auto Standby Timer
The AUTO STANDBY Timer can be set so that the unit
will automatically be placed in STANDBY and come back
out of STANDBY and be placed into RUN mode at a set
time each day.
Unit Under Counter
(Factory set to “OFF”)
This option will lock out any type of automatic dispense
out of the unit (Accu DIspense accessory D13661 will still
operate normally.) This will prevent accidental dispensing
from the unit if it is located under a counter or similar area
such that the unit dispenser is not in site of the user but
the display is (i.e. remote mounted display.)
NOTE: When “UNIT UNDER COUNTER” is set to
“ON,” Auto Dispense will not be available from the
main unit dispenser.
I
NITIAL
O
PERATION
Options
Procedure
Auto Standby
MENU
SYSTEM OPTIONS
AUTO STANDBY STATE
Scroll to and
set start time
OK
Scroll to and set stop time
OK
Unit Under Counter
MENU
SYSTEM OPTIONS
UNIT UNDER COUNTER
Choose ON or
OFF
OK
Display Contrast
MENU
SYSTEM OPTIONS
DISPLAY CONTRAST
Adjust up and
down to desired contrast
OK
Set Units
MENU
SYSTEM OPTIONS
SET UNITS
Choose desired units in
each screen
OK
Printer Attached
MENU
SYSTEM OPTIONS
PRINTER ATTACHED
Choose YES or
NO
OK
Reservoir Type
MENU
SYSTEM OPTIONS
RESERVOIR TYPE
Choose DIAMOND TII
or ALTERNATE
OK
35
