4.
Press the SCROLL button until display reads
“Hb.”
5.
Press the UP or DOWN button to toggle between
“bAnd, Hi, Lo and OFF.”
6.
Press the SCROLL button until display reads,
“tGt.”
7.
Press the UP or DOWN button to set a target set-
point.
8.
Press the SCROLL button until display
reads,”rAtE.”
9.
Press the UP or DOWN button to select a value
in ramp units (seconds, minutes or hours; set in
the “rmP.U” parameter).
rmP.t
To ramp to a specified temperature at at set time:
1.
Press the PAGE button until you reach the pro-
gram list (ProG LiSt).
2.
Press the SCROLL button until display reads,
“tYPE.”
3.
Press the UP or DOWN button until display
reads, “rmP.t.”
4.
Press the SCROLL button until display reads,
“tGt.”
5.
Press the UP or DOWN button to set a target set-
point.
6.
Press the SCROLL button until display reads,
“dur.”
7.
Press the UP or DOWN button to select a time in
ramp units (seconds, minutes or hours; set in the
“rmP.U” parameter.
dwEll
To maintain a constant temperature for a specified time:
1.
Press the PAGE button until you reach the pro-
gram list (ProG LiSt).
2.
Press the SCROLL button until display reads,
“tYPE.”
25
O
PERATION
