![background image](http://html1.mh-extra.com/html/baroness/fs900/fs900_service-manual_3907959111.webp)
Inspection and repair of each section
Axle Mounting Bracket
Inspecting the Axle Installation Bracket
Wear of bearings due to frequent usage and
damage to bearings etc. caused by moisture
entry may prevent smooth rotation of the ball.
Inspect the bearings, axle installation bracket,
and the like, and replace the parts as
necessary.
Make sure that the bearings are free of
wear and rust, and that the axle installation
bracket and bearing is free of play.
Make sure that the steering shaft and
bearings are free of play.
Remove the axle installation bracket ass'y
from the main unit. (See "Removing the
Steering Wheel Section" (Page 6-10) .)
Remove the upper and lower stop ring from
the axle installation bracket ass'y.
Tap the steering shaft using the hammer in
the direction of the arrow, and remove the
steering shaft.
1
3
2
2
4
3
xbg984-001
Inspecting the Axle Installation Bracket_001
1
Axle installation bracket ass'y
2
Stop ring
3
Bearing
4
Steering shaft
Insert the metal pipe into the axle
installation bracket ass'y .
・
・
1.
2.
3.
4.
Tap the metal pipe with a hammer in the
direction of the arrow, and remove the
bearing.
Important
Be sure to replace the bearing with a new
one.
1
2
3
xbg984-002
Inspecting the Axle Installation Bracket_002
1
Axle installation bracket
2
Bearing
3
Metal pipe
Assemble the axle installation bracket ass'y
following the procedure in reverse.
Important
The stop ring has a specific installation
orientation.
Install it in the correct orientation.
Note:
Use a bearing driver to drive in the bearing.
Make sure that the steering shaft turns
lightly.
5.
6.
7.
Main body
FS900
Main body
Page 6-13
Inspection and repair of each section
Summary of Contents for FS900
