![background image](http://html1.mh-extra.com/html/baroness/fs900/fs900_service-manual_3907959041.webp)
1
O-ring
2
Sheet surface
Caution
Never give the locknut more than one turns. If
you give it more than one turn, the thread fit
between the other side port and locknut
becomes loose, which reduces the thread
strength.
If the washer goes too deeply into the other
side port, the washer gets deformed, which
leads to oil leakage.
Rough installation makes the main body and
nut overloaded, which leads to deformation.
Be sure to observe the installation procedure.
To fit, screw the main body by hand till the
washer face touches lightly, and turn from
that position in the loosening direction to
the setting position.
After fitting the opposite screw, tighten the
lock nut while holding the main body with
a spanner etc. to ensure that the setting
position does not change.
3.
4.
Hydraulic system
FS900
Hydraulic system
Page 4-13
General instructions
Summary of Contents for FS900
