![background image](http://html1.mh-extra.com/html/baroness/fs900/fs900_service-manual_3907959067.webp)
Caution
Before starting pressure measurement, make
sure that there are no people around the
machine.
Remove the cartridge filter side of the
hydraulic hose that connects the cartridge
filter and hydraulic pump.
1
2
3
zg85f8-033
Charge Circuit_002
1
Cartridge filter
2
Elbow with different diameter
3
Hydraulic hose
Prepare a pressure gauge for extremely low
pressure measurements.
1
3
7
4
2
2
5
6
zg85f8-034
Charge Circuit_003
1
Pressure gauge for extremely low
pressure measurements
2
Adapter
3
Threaded tee
4
Special adapter
5
Hydraulic hose
6
Connecting location of the elbow from
which the hose was removed
7
Connecting location of the removed
hydraulic hose
1.
2.
Install the pressure gauge for extremely low
pressure measurements between the
removed hydraulic hose and cartridge filter
elbow.
Secure the pressure gauge for extremely
low pressure measurements with bands.
1
2
zg85f8-035
Charge Circuit_004
1
Pressure gauge for extremely low
pressure measurements
2
Band
Start the engine, and rev it up to the
maximum rpm.
The normal pressure is 1.0 MPa (10.19
kgf/cm
2
) (145 psi).
3.
4.
5.
Hydraulic system
FS900
Hydraulic system
Page 4-39
Measurement
Summary of Contents for FS900
