![background image](http://html1.mh-extra.com/html/baroness/fs900/fs900_service-manual_3907959071.webp)
Inspection and repair of each section
Hydraulic Oil
Inspection of Hydraulic Oil
On a level surface, raise the brush frame
and maintain that position.
Make sure that the oil level is at the middle
of the oil gauge.
1
olekci-001
Inspection of Hydraulic Oil_001
1
Oil gauge
Check underneath the machine for oil
leakage.
Hydraulic Oil Supply
Important
Do not mix different types of oil.
Important
Use Shell Tellus S2M46 (or equivalent) as
hydraulic oil.
Remove the knobs, and then open the front
cover.
1
2
2
dmhzyz-001
Hydraulic Oil Supply_001
1
Knobs
2
Front cover
1.
2.
3.
1.
Remove the bolts, and then open the cover.
2
1
dmhzyz-002
Hydraulic Oil Supply_002
1
Bolt
2
Cover
If the oil level is low, open the tank cap and
supply oil.
1
dmhzyz-003
Hydraulic Oil Supply_003
1
Tank cap
Start the engine, raise and lower the brush
frame, and then drive the machine forward
and in reverse repeatedly several times.
On a level surface, raise the brush frame
and maintain that position, and then check
to see if the oil level is at the middle of the
oil gauge. If necessary, supply oil.
Check underneath the machine for oil
leakage.
2.
3.
4.
5.
6.
Hydraulic system
FS900
Hydraulic system
Page 4-43
Inspection and repair of each section
Summary of Contents for FS900
