![background image](http://html1.mh-extra.com/html/baroness/fs900/fs900_service-manual_3907959081.webp)
Adjustment
Brake pedal switch
Adjust the brake pedal switch by loosening the
nuts so that A is 2 mm (0.079 in) or more when
the parking brake is not engaged, and B is 6
mm (0.24 in) or less when the brake pedal is
fully depressed.
Tighten the nuts, taking care not to move the
position of the adjusted pedal brake switch.
5
1
2
3
5
5
A
B
4
4
4
9sbu2p-004
Brake pedal switch_001
1
When the brake pedal is released
(non-contact)
2
When the parking brake is set
3
When the brake pedal is fully
depressed
4
Nuts
5
Brake pedal
A
2 mm (0.079 in) or more
B
6 mm (0.24 in) or less
Forward/reverse pedal proximity switch
Adjust the position of the forward/reverse pedal
proximity switch so that gap A is 5 mm (0.20 in)
or less when the forward and reverse pedals
are in the neutral position.
Loosen the bolts and adjust the sensor
mounting plate by moving it parallel to the
plastic magnet.
Tighten the bolts while taking care not to
move the sensor mounting plate.
Tighten the bolts to a torque of 7 N-m (61.96
lb-in).
1
2
5
4
3
A
5dzl8y-001
Forward/reverse pedal proximity switch_001
1
Forward/reverse pedal
2
Plastic detection magnet
3
Forward/reverse pedal proximity
switch
4
Bolts
5
Sensor mounting plate
1.
2.
Electrical system
FS900
Electrical system
Page 5-7
Adjustment
Summary of Contents for FS900
