Air Adjusting Plate
Caution
The air adjusting plate should be operated
while the engine rotation is stopped, and
adjusted to the position suitable for your work.
The air adjusting plate is attached on the reel
cover.
The dispersing angle of clippings can be
adjusted by changing the position of the air
adjusting plate.
Adjust it according to the grass condition and
the reel rotation (high/low speed).
The air adjusting plate can be moved closer to
the reel cutter when the grass condition is
“
dry
”
or the reel rotation is "high speed."
The air adjusting plate can be moved away from
the reel cutter when the grass condition is "wet"
or the reel rotation is "low speed."
B
1
3
2
A
8h3xpo-001
Air Adjusting Plate_001
1
Air Adjusting Plate
2
Reel cutter
3
Reel cover
A
Close
B
Away
Engine Clutch Cover
The engine clutch cover is located on the left
side of the engine and covers the engine clutch.
Open or close the engine clutch cover by
removing or installing the lock bolt.
1
2
A
B
paspfk-005
Engine Clutch Cover_001
1
Engine clutch cover
2
Lock bolt
A
Loosen
B
Tighten
Groomer Clutch Lever
Note:
Depending on the specifications, this function
may not be available.
Caution
This lever should be operated while the main
clutch lever is set to the disengaged position,
and adjusted to the position suitable for your
work.
The groomer clutch lever is located on the upper
side of the right frame and has three positions.
When the lever is set to the "Normal " position,
the groomer rotates in the same direction as the
reel cutter (cutting cylinder).
When the lever is set to the "Reverse " position,
the groomer rotates in the opposite direction as
the reel cutter (cutting cylinder).
When the lever is set to the "Stop" position, the
groomer will not rotate.
A
B
C
1
aqilnf-001
Groomer Clutch Lever_001
Description of Functions
LM18GC
・
LM56GC / LM66TC
Description of Functions
Page 4-5
Air Adjusting Plate
