Cultivator
Inspection of Cultivator
Note:
Depending on the specifications, this function
may not be available.
Due to frequent use or damage caused during
use or transportation, it may become difficult
to adjust the sand depth.
Inspect, and if necessary, repair or replace.
Make sure that the cultivator wire is not
broken.
Make sure that the free lock pin is not
missing.
Make sure that the parker clamp is not
loose.
Make sure that the trapezoidal cultivator
fitting is not worn.
2
3
4
1
h56wah-001
Inspection of Cultivator_001
1
Cultivator wire
2
Free lock pin
3
Parker clamp
4
Trapezoidal cultivator fitting
Finishing Brush
Inspection of Finishing Brush
Note:
Depending on the specifications, this function
may not be available.
Due to frequent use or damage caused during
use or transportation, the rake may leave
tracks.
Inspect, and if necessary, repair or replace.
Make sure that the brush mounting frame is
not bent.
Make sure that the brush is not bent or
excessively worn.
1.
2.
3.
4.
1.
2.
Oil Cooler
Inspection of Oil Cooler
Make sure that there is no damage to the
oil cooler.
Make sure that the oil cooler is not
contaminated.
Cleaning of Oil Cooler
Important
An unclean oil cooler may cause malfunction
of the hydraulic system.
Important
Do not use solid objects, such as a spatula or
screwdriver, or high-pressure water to clean
the radiator or oil cooler.
Otherwise, special fins or tubes may be
damaged, possibly resulting in reduced
cooling performance or hydraulic oil leakage.
If the oil cooler has been contaminated with
dust, be sure to clean it.
After operating the machine in a dusty
environment, it is important to remove dust as
soon as possible.
Open the rear cover.
Carefully clean the front and back of the oil
cooler with water or compressed air.
1.
2.
1.
2.
Handling Instructions
SP05A
Handling Instructions
Page 4-3
Inspections
Summary of Contents for SP05A
