Engine Oil
Inspection of Engine Oil
Important
Securely tighten the oil level gauge and oil
filler cap.
Stop the engine, wait for 10 to 20 minutes
for the engine to cool down, and then check
the engine oil.
Position the machine so that the engine will
be level, then insert the oil level gauge all
the way to check the oil level.
1
2
bgmiun-004
Inspection of Engine Oil_001
1
Oil level gauge
2
Oil filler cap
The appropriate oil level should be between
the upper and lower limit lines on the
gauge.
1
2
3
bgmiun-003
Inspection of Engine Oil_002
1
Oil level gauge
2
Upper limit
3
Lower limit
1.
2.
3.
Supply of Engine Oil
Important
Do not fill too much engine oil. Otherwise, the
engine may be damaged.
Important
Do not mix different types of engine oil.
Important
Be sure to use engine oil that is classified as
API Service Grade SF or higher, with an SAE
Viscosity that is appropriate for the operating
environment (ambient temperature).
Important
Securely tighten the oil level gauge and oil
filler cap.
If they are insufficiently tightened or there is
an insufficient seal, negative pressure inside
the crankcase cannot be maintained, causing
the oil to rise, possibly resulting in the
production of white smoke and damage to the
engine.
If the engine oil level is lower than the lower
limit line on the oil level gauge, supply
engine oil through the oil filling port.
Remove the oil filler cap.
Supply new engine oil until the oil reaches
a level in between the upper and lower limit
lines on the oil level gauge.
Re-place the oil filler cap.
1
2
bgmiun-004
Supply of Engine Oil_001
1
Oil level gauge
2
Oil filler cap
1.
2.
3.
SP05A
Handling Instructions
Page 4-8
Inspections
Summary of Contents for SP05A
