Page 5/7
Specifications
IEEE Standards
IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3x Flow Control and Back Pressure
Switch Architecture
Back-plane (Switching Fabric): 1Gbps
Data Processing
Store and Forward
Flow Control
IEEE 802.3x Flow Control and Back Pressure
MAC address Table Size
1K
Packet Buffer Size
448k
Network Connector
5xRJ-45 10/100/1000BaseT(X) auto negotiation,
Auto MDI/MDI-X function, Full/Half duplex
Network Cable
UTP/STP above Cat.5e Cable
Protocol
CSMA/CD
LED
PW1 (Green): ON
－
Power 1 is detected
PW2 (Green): ON
－
Power 2 is detected
TX/RJ-45 port:
TX/RJ-45 port:
LNK (Link/Active) (Green): ON
－
TX port is detected
Flashing
－
TX data is transmitting/receiving
Reserve polarity protection
Present
Overload current protection
Present
Power Supply
Redundant Dual DC 12V-56V Power Input
Power Consumption
2.24W@48 VDC full load
Removable Terminal Block
Provide 1 power, 2 Pin
Wire range: 0.34mm^2 to 2.5mm^2
Solid wire (AWG):12-24/14-22
Stranded wire(AWG): 12-24/14-22
Torque:5lb-In/0.5Nm/0.56Nm
Wire Strip length: 7-8mm
Operating Temperature
-40°C ~75°C
Operating Humidity
5% to 95% (Non-condensing)
Storage Temperature
-40°C ~85°C
MTBF (mean time between failure)
>500,000 hrs (Telcordia (Bellcore), GB) at 50°C
Housing
Rugged Aluminum, IP30 Protection
Case Dimension (L x W x D)
103.5 x 32 x 81.5 mm (L x W x D)
Installation mounting
DIN Rail and Wall Mount options included
