Barracuda CloudGen Firewall
6 / 7
Time and date
Shows time and date currently configured on the appliance.
Uptime of Barracuda OS
The uptime in days, hours, and minutes.
Serial number of the appliance
Unique identifier for the appliance.
Shutdown menu
Enables you to shut down the appliance.
Reboot menu
Enables you to reboot the appliance.
Menu to change the
management IP address
Configure the IP address for the management port.
next reboot
Enables you to set a flag that will cause the appliance to boot into
ART the next time it is rebooted.
Once set, this flag cannot be deleted through the menu. When
rebooted, the appliance will not start Barracuda OS, but ART
instead. You may connect to the appliance by using the serial
console or by SSH. A managed F-Series Firewall running in ART
mode cannot be managed through the Control Center, although it
will connect to the Control Center to signal its presence.
Rack Mounting
For information on how to mount your appliance, see
Rack Installation for Barracuda NextGen Firewall
.
