World Tour Foosball Table
Instruction Manual
service@barrongames.com
Page 24
For assistance call: +
1-716-866-0054
Troubleshooting the PC Board
LED screens above the goals will show the errors codes when the table is out of order. When there is
an error, press the Troubleshooting Button. Here is a list of error codes:
Error Codes
10 Coin comparator 1: coin stuck
11 Coin comparator 2: coin stuck
20 Ascent of elevating device is out of order.
(see section:
Troubleshoot the Elevating Device
)
21 Descent of elevating device is out of order.
(see section:
Troubleshoot the Elevating Device
)
22 The ball is not in the track.
(Check the sensor nearest the ball release)
23 The ball does not score.
(Check the sensor nearest the goal)
30 Safety switch is not pressed.
Troubleshooting the Elevating Device
A Quick Check
“When the actuator raises the ball at the
start of the game, the arm rises above the
playfield.”
Try this:
----------------------------------------------------
à
The metal part of this MICRO SWITCH should be
pulled down a little.
So when the ball raises, the black bar should touch
the metal part of the micro switch earlier.
The white cylinder will also stop sooner and
shouldn’t carry the actuator arm above the
playfield.
