AC Connections, Continued
AC Input/Output Wiring Connections to Terminal Block
Depending on how the fixture load is to be operated, wire the system as described below:
Normally-On Operation - Connected fixture(s) remain illuminated in AC and emergency modes. See Fig. 3.
Normally-Off Operation - Connected fixture(s) illuminate only upon loss of utility AC power. See Fig. 4.
Normally-On and Normally-Off Operation - A combination of the operating modes described above. See Fig. 5.
Switched Load Operation - Single Circuit - Connected fixture(s) can be extremely switched and will illuminate upon loss of
utility AC power regardless of external switch position. See Fig. 6.
Legend
INPUT SUPPLY FROM UNSWITCHED UTILITY RATED 20 AMPS MAXIMUM
OUTPUT(S) TO LIGHTING LOADS
Fig. 3 - Normally ON Loads
Fig. 4 - Normally OFF Loads
Fig. 5 - Normally ON & OFF Loads
Fig. 6 - Switched Loads
Tucson Micro Series
Installation Instructions
10070249
R
EV 1 - 06/21
8
800-533-3948 www.barronltg.com
