SOUND OPTIONS
Sound OFF
Press *633 on keypad
Beep ON
Press *66 on keypad
OPEN SAFE WITH EMERGENCY KEY
1. To expose the Emergency Key access, remove Logo
Plate screws with provided tool
2. Insert Emergency Key into key access, push and turn
key counter-clockwise, and turn Handle clockwise to
open the safe
NOTE: Store Emergency Keys in a secure place, NOT
inside of the safe
LOW BATTERY WARNING
1. When the door is closed and 3 repetitive beeps are
heard, and Indicator Lights flash red, it indicates the
batteries are low
2. Replace batteries immediately
- Open safe, remove Battery Compartment cover and
all 4 AA batteries
- Insert 4 new AA batteries and restore Battery
Compartment cover
NOTE: After batteries are out over 24 hours, all the
registered PIN codes will not be retained. Please use the
key to open the safe and reset the PIN codes.
CARE AND MAINTENANCE
- To maximize the security and performance of the safe,
keep keypad clean; use a dry cloth to remove any
smudges after each use
- Keep liquids away from the control panel. Spills on the
control panel will cause damage and possibly
electric shock
- Secure safe in a proper area to prevent from falling and
causing damage or injury
- DO NOT disassemble the product. For all repairs, contact
BARSKA Customer Service
- DO NOT use chemicals or cleaning agents to clean
the safe
MOUNTING INSTRUCTIONS
The safe must be mounted to a wall or floor. Be aware
of the load bearing. Failure to do so can result in
personal injury and/or damage to property. Use
appropriate tools when performing work and always use
eye protection
Wall Mounting
Do not mount the safe without anchoring to the wall
- Find the studs in the wall, at your desired location.
Most studs are 16 inches or 24 inches apart
- Check the wall for concealed wires or pipes Measure
the location of the pre-set drill holes; mark their exact
position onto the wall ensuring that the studs or
anything else behind will not interfere
- Drill the appropriate size holes for the anchors you
are using
- Carefully press the anchor into the holes at this time
- Mount the safe by running screws from inside of the
safe and securing to anchors; ensure the safe is
mounted securely
Floor Mounting
- Use proper drill tools depending on the type of floor
you are mounting the safe (wood, tile, or concrete)
- Measure the location of the pre-set drill holes; mark
their exact position onto the floor
- Drill the appropriate size holes for the anchors you
are using
- Carefully press the anchor into the holes at this time
- Mount the safe by running screws from inside of the
safe and securing to anchors; ensure the safe is
mounted securely
SAFE/LOCK BOX
BC767
3/24
BARSKA warrants this new safe/lock box to be free of defects
in material and/ or workmanship under normal use for a period
of twelve (12) months from the date product is purchased. This
limited warranty is delimited to repair or replacement only. This
warranty does not cover damage caused by improper
installation or maintenance. BARSKA disclaims all liability for
incidental or consequential damages resulting from misuse,
abuse, accident (such as dropping), fire, flood, service or
repairs other than those performed by BARSKA, acts of
nature, or arising out of any breach of this warranty. Altering
the product under any circumstances will automatically void
the warranty.
For service under this limited warranty, please have available
the proof of purchase and the purchase date and location as
well as a detailed description of the problem. This warranty is
not transferable and only applies to the original purchaser with
a proof of purchase from BARSKA or from an authorized
dealer. This warranty applies only to products purchased
within the United States, excluding Alaska, the Hawaiian
Islands and all U.S. territories in the Caribbean and the Pacific.
BARSKA will examine and go through troubleshooting
procedures, product repair or replacement of defective part(s)
or units with new part(s) or provide a new unit, if necessary,
during the warranty period. Reasonable shipping/handling
charges may apply and are based on Barska sole discretion.
Purchaser shall be required to prepay Shipping/handling
charges with a check or money order to BARSKA at time
product is returned. The Return Merchandise Authorization
Number (RMA#) and shipping/handling charge MUST be
obtained from BARSKA in advance of return. BARSKA shall
not be liable for damages or loss occurring during shipping.
Please visit via www.barska.com or call 909.445.8168 to
obtain the RMA#, Shipping/handling amount, and for more
information.
BARSKA reserves the right to modify or discontinue, without
prior notice to the purchaser, any model or style of the product.
BARSKA will determine, at its sole discretion, whether a
product will be repaired or replaced. BARSKA reserves the
right to discontinue or change any feature of its products at
any time. If an exact replacement or product is not available,
BARSKA reserves the right to provide a part or product that
matches as closely as possible.
LIMITATION OF REMEDIES
BARSKA disclaims any warranties, express or implied,
whether of merchantability or fitness for a particular use,
except as expressly set forth herein. The sole obligation of
BARSKA under this limited warranty shall be to repair or
replace the covered product, in accordance with the terms set
forth herein. BARSKA expressly disclaims any lost profits,
general, special, indirect or consequential damages which
may result from breach of any warranty, or arising out of the
use or inability to use any BARSKA product. Any warranties
which are implied and which cannot be disclaimed shall be
limited in duration to a term of one year from the date of
original retail purchase.
Some states do not allow the exclusion or limitation of
incidental or consequential damages or limitation on how long
an implied warranty lasts, so the above limitations and
exclusions may not apply to you.
BARSKA
855 Towne Center Drive, Pomona, CA 91767
1 YEAR LIMITED WARRANTY
