www.barska.com
Table Of Contents
Page
Introduction
3
Parts of the Camera
3
Batteries
3
Saving Images and Videos
4
File Naming
4
Quick Start Guide
4
Advanced Settings
5
Set CAM (Camera Setting)
5
Set Camera Mode
5
Set Photo Size
5
Set Photo Burst
5
Set Video Size
5
Set Video Length
5
Set PIR Level (Picture in Range)
5
Set PIR Delay
6
Set Self Timer
6
Set Time Lapse
6
Set SYS (System Setting)
7
Set Date and Time
7
Set Time Stamp
7
Set Password
7
Set Format
7
Set to Default
Factory Settings
7
Default Settings
9
Playback
9
Viewing Photos
9
Deleting Photos
9
Viewing Videos
10
Upgrading Software
10
Technical Specifications
10
Caution Notes
11
Warranty
12
6MP Trail Camera
2
A
B
C
D
E
F
G
H
I
J K
L
M
www.barska.com
6MP Trail Camera
3
This camera is a digital infrared surveillance camera triggered by any movement of humans
or animals using a high sensitive Passive Infrared (PIR) motion sensor that automatically
captures high quality pictures up to 6MP and records VGA video clips. Images and videos
are taken in color under sufficient daylight. At night or low light conditions the camera’s
built-in infrared LED’s capture black and white images or videos. The 1.5” color LCD
display screen on the camera is water resistant.
CAUTION:
The camera has no internal memory, insert SD card before operation; the
camera will shut down automatically if NO SD card is inserted
Parts of the Trail Camera
Front View of the Camera
A. 28 Infrared Lights
B. LED Indicator
C. Passive Infrared (PIR) Motion Sensor
D. Lens
E. Lock Hole
Inside of the Trail Camera
F. Display Screen
G. Operation Panel
H. Switch
I. Battery Compartment
Requires 8 AA Batteries
Under Side of the Trail Camera
J. External DC Power Connector
K. USB Connector
L. SD-Card Slot
M. Tripod Adaptable Fitting
Batteries
- The camera is powered by 8, AA batteries, insert batteries as directed on the inside panel
of the cameras battery compartment and pay attention to the polarity.
- To conserve battery life, remove batteries when camera is not in use for long periods
of time
Note: The camera will automatically shut down in the low-battery state after two indication
sounds. Please change the batteries immediately.
