Digital Keypad Safe
www.barska.com
Digital Keypad Safe
3
Mounting Through The Bottom Of The Safe
1. Check the floor for what type it is (wood, tile and or concrete)
2. Get the appropriate anchors for the type of floor you have.
3. Check location on the floor for concealed wires or pipes
4. Mark the floor to drill your anchor.
5. Drill the appropriate size hole for the anchors you have
6. Mount the safe and make sure it is securely mounted
7. For mounting to the top of a cabinet you may want to use carriage bolts
through the top of the cabinet.
DO NOT
mount safe to a shelf in a cabinet or closet without anchoring to the wall
behind the safe!
Mounting Through The Back Of The Safe
1. Check the wall or cabinet for structural soundness
2. For safety, have someone help to hold the safe during mounting.
3. Check location for concealed wires or pipes.
4. Mark the surface to drill holes for the anchors you will be using.
5. Drill the appropriate size holes for the anchors you are using
6. While having someone hold the unit, anchor the safe to the wall
7. Test the strength of the mounted safe so it will not fall off the wall or cabinet
DO NOT
place safe on a shelf without proper mounting into a wall.
IMPORTANT INSTRUCTIONS
Please keep this manual and override key in a safe place
(NOT INSIDE OF THE SAFE)
DO NOT
use any liquid while cleaning the keypad, if necessary use a damp cloth
to clean the keypad
Make sure the safe is anchored properly as it can fall and hurt people and or
property
DO NOT
place any liquid on top of the safe; a spill on the keypad may render the
safe inoperable
DO NOT
open the back cover or try to repair the safe yourself
DO NOT
over stuff the contents of the safe or you can damage the motor
mechanism or the contents
DO NOT
keep the override keys inside of the safe
WARRANTY POLICY
1. BARSKA warrants this Digital Keypad Safe against original defects in material
and/or workmanship under normal use for a period of twelve (12) months from
the date product is received by purchaser.
2. This warranty is limited to original purchaser and is not transferable.
3. This Warranty applies only to products purchased in the United States.
4. BARSKA will examine and test returned product and repair or replace
defective part(s) or units with new part(s) or a new unit if necessary within the
warranty period. Purchaser is required to remit
$40.00
to BARSKA for return
shipping and handling at time product is returned.
5. If repair is required after warranty period expiration, purchaser will be charged
for replacement parts and return shipping.
6. Purchaser must contact BARSKA at 1.909.445.8168 to request a Returned
Merchandise Authorization (RMA) number. The RMA number must appear
on the outside of the shipping package. Product must be packed carefully and
sturdily in its original packaging to prevent damage in transit and returned
freight pre-paid to:
BARSKA
Repair Department
1721 Wright Avenue
La Verne, CA 91750
Please include all of the following when returning BARSKA products for service
and/or replacement:
1. Please write your complete details (Name, Address, Telephone #,
E-mail address, RMA#, etc.)
2. Purchase receipt or Proof of Purchase. (Original/Copy)
3. A brief explanation of the defect.
4. A Check/Money Order of
$40.00
to cover inspection, shipping and handling.
*Please allow 6-8 weeks for delivery.
What is not covered by this Warranty?
1. Damage caused by improper installation or maintenance.
2. Damage from misuse, abuse, accident (such as dropping), fire, flood, or
acts of nature.
3. Damage from service or repairs other than those performed by BARSKA.
4. Labor, cost and shipping charges for the removal and replacement of defective
parts beyond the initial twelve-month warranty period.
5. All transportation and shipping charges.
6. Removing or altering the seal on the rear of the front part of the safe
under any circumstances will automatically void the warranty.
4
Meijer.com
