background image

2

3

Notes Before Use

- This metal detector is a professional metal detector. As a sophisticated electronic 

  device, the most difficult aspects in metal detecting have been preset. 

- If you are new to using metal detectors, it is recommended to set the sensitivity to a 

  low level in the event of false signals. 

- Always begin at a low sensitivity level when using. After you have become 

  familiar with the detector, you may try it at full sensitivity.

- This detector is for outdoor use only. Do not use indoors. Many home appliances 

  can emit electromagnetic waves, and will interfere with the detector. 

- For indoor testing, turn the sensitivity low and keep the search coil away from 

  electronics such as microwave ovens, computers and TVs. If your detector beeps 

  erratically, turn off the electronic appliances and lights, especially those with

  dimmer switches.

- Read this manual before using. 

Treasure Hunter’s Code of Ethics

A few basic rules you should follow while using your detector.

- Always get permission before searching any site.

- Respect the rights and property of others.

- Observe all national, state and local laws when treasure hunting.

- Never destroy historical or archaeological treasures. If you are not sure about an 

  object you have found, contact a museum or historical society in your area.

- Leave the land and vegetation as is, and fill in any holes you dig.

- Use the detector only in safe areas.

- Dispose of any junk you may find, only in approved areas. Do not leave it for the   

  next treasure hunter find.

CONTENTS

Preparation

4

Parts of the Metal Detector

4

Assembly

4

Batteries

5

Headphones

5

Control Panel

6

LCD Screen

6

Control Buttons

7

Operation

7

Power On

7

Testing and Using the Detector

7

Indoor Testing and Use

7

Target Indications

9

Numeric

9

Type

9

Tones

9

Outdoor Testing and Use

10

Search Coil Sweeping Hints

10

Adjusting Sensitivity

11

Pinpointing The Target

11

Factors That Affect The Detecting

12

Care and Maintenance

12

Warranty

13

Summary of Contents for Winbest Elite-200 Edition








Reviews: