background image

12

13

Factors That Affect The Detecting

It’s difficult to have an accurate detecting result. Sometimes the detecting may be 

restricted by some factors:

- The angle of the target buried in the soil.

- The depth of the target.

- The level of oxidization of the target.

- The size of the target.

- Electro-magnetic and electrical interference surrounding the target.

In area of highly mineralized ground or wet sand, the detector will sound even if there 

is no metal. In this case, you can lower the sensitivity or increase the DISC numeric 

value. Meantime enhance the distance between the search coil and the ground.

In area with trashy metal, you can set DISC numeric value to 50. In this case most 

nails and small pieces of iron will be eliminated.

Metallic digging tools will also affect the detection if they are near the search coil. So 

it’s better place them a little far away. 

Care and Maintenance

Handle the detector gently and carefully. Dropping it can damage circuit boards and 

cases and can cause the detector to work improperly.                 

Use the detector only in normal temperature environments. Temperature extremes 

can shorten the life of electronic devices, damage the cases of the detector.   

Keep the detector away from dust and dirt, which can cause premature wear of parts.

Wipe the detector with a damp cloth occasionally to keep it looking new. Do not use 

harsh chemicals, cleaning solvents, or strong detergents to clean the detector.

CAUTION:

· The search coil is water proof, and it can be completely under the fresh water or 

  sea water. Please be careful to avoid the water enter into machine body. Sea water 

  may erode the search coil. Please always use fresh water to clean the search coil 

  after detection in sea water. 

· Change or damage the inner components will cause the detector fault, and such 

  fault is not within our warranty.

Metal Detector

WINBEST® by BARSKA®, as manufacturer, warrants this new product to be free of 

original defects in materials and/or workmanship for the length of time specified by this 

warranty. This warranty does not include damage caused by abuse, improper handling, 

installation, maintenance, normal wear-and-tear, unauthorized repairs or modifications 

and tampering in anyway.

This warranty is limited to the original purchaser and is not transferable. This warranty 

applies only to products purchased in the United States of America and Canada.

In the event of a defect within 30 days, the consumer must return the defective unit to the 

WINBEST® by BARSKA® dealer (the place of purchase) at his/her own expense.

Beyond 30 days, WINBEST® by BARSKA® products should be sent to the following 

address for warranty repairs. Products must be packed carefully and sturdily to prevent 

damage in transit, and returned freight prepaid to:

WINBEST® by BARSKA®

855 Towne Center Drive

Pomona, CA 91767

For additional and updated information

please visit www.barska.com

Please email info@barska.com or call 1.888.666.6769 for Return Merchandise Number 

(RMA#) before any returns.

NOTE: All merchandise received without a valid RMA# will be returned to shipper at his/

her own expense.

Please include all of the following when returning WINBEST® by BARSKA® products for 

service and/or replacement:

1. Please write your complete details (Name, Address, Telephone #, E-mail address,

    RMA#, etc.)

2. Purchase receipt or Proof of Purchase. (Original/Copy)

3. A brief explanation of the defect

4. A Check/Money Order of $25.00 to cover inspection, shipping and handling

*Please allow 6-8 weeks for delivery

This product will either be replaced or repaired at the discretion of the warrantor. If it’s 

a discontinued item, we will replace the product with an equivalent product. Should the 

repair not be covered by this warranty, an estimate will be sent for your approval. Non-

warranty repairs or refurbishing are always provided at a reasonable cost.

WINBEST® by BARSKA® shall not be liable for any consequential, incidental and/or 

contingent damages whatsoever. We will not pay shipping, insurance or transportation 

charges from you to us, or any import fees, duties and or taxes. This warranty supersedes 

all previous Winbest® by BARSKA warranties.

©2015 BARSKA®

BC317

1 YEAR LIMITED WARRANTY

8/15

Summary of Contents for Winbest Elite-200 Edition








Reviews: