34 CLEANING METHOD
[
How to clean 'Stop-bar'
]
3ℓ
1.Remove the stop-bar
and part from the machine.
Pre-rinse the stop-bar and
parts with lukewarm water
100-110˚F (37.7-43.3˚C).
Water temperature should
not exceed 120˚F (48.9˚C)
2. Use 5 liter sized bucket,
add 3L of hot water
(160-170˚F/71.1-76.7˚C) and
180ml of dish detergents
and make dish solution.
The dish detergent
must
contain alkaline or chlorine
to dissolve milk fats and
proteins from the stop-bar
and parts.
3. Add all the part on the
dish solution for 5 minutes.
4. Pull out the part one-by-
one and scrub carefully with
toothbrush. Brush all parts
thoroughly. After brushing
stop-bar and parts, drain the
dish solution.
5. Rinse stop-bar and parts
with lukewarm water 100˚F
(37.7˚C) to 110 ˚F (43.3 ˚C)
thoroughly for minimum
2-3minutes. .
6. Pour 82.2˚C (180˚F) of hot
water on the clean bucket
and put all the rinsed
stop-bar and parts for
sanitize.
7. After 30 seconds, remove
the part from the bucket.
Wipe off the water from the
part with clean dry white
linen and let it dry.
8. Be careful not to lose the
part during the cleaning
process.
Summary of Contents for SUF-200NW-CK
Page 40: ...NOTES...
