05-0091-7D0007-10/2019-BARTEC WerbeAgentur-435286
3
Transport, storage
ATTENTION!
Damage to the installation kit as a result of
incorrect transport or incorrect storage.
- Transport and storage are only permitted in
the original packaging.
Assembly, Installation, and
Commissioning
WARNING!
Risk of injury due to incorrect procedure.
- Assembly, dismantling, installation and
commissioning work may only be carried out
by authorised, qualified personnel.
ATTENTION!
Damage to equipment due to incorrect procedure.
- Check that the installation kit and switch are in
perfect working order (undamaged).
Assembly/dismantling
The installation kit consists of two parts: mounting bracket (1),
base plate (2) and two grub screws with coating to secure the
screws (3).
Assembling the mounting bracket
Labelling
Especially important parts of these instructions are marked
by a symbol:
DANGER
indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING
indicates a potentially hazardous situation which,
if not avoided, could result in deat or serious injury.
CAUTION
indicates a potentially hazardous situation which,
if not avoided, may reult in death or serious injury.
ATTENTION
indicates a potentially hazardous situation which,
if not avoided, may result in property damage.
NOTE
Important instructions and information on effective,
economical and environmentally compatible handling.
–
Insert the actuating element (4) 1 to 5 mm (0.04 to 0.2 in)
into the housing wall (6). Ensure that the retention lug (5) on
the actuating element sits in the opening (7) in the housing
wall.
–
Place the mounting bracket (1) onto the screw thread of the
actuating element (4). Take care that, where applicable, the
retention lug (5) on the actuating element sits in the opening
(8) of the mounting bracket.
–
Using the spanner (10), order number 05-1191- 0001, screw
the fixing nut M30x1.5 (9), order number 05-1138- 0009,
onto the actuating element (4). Tightening torque 2.8 to
3.4 Nm.
