Bartec Agile S NI, Quick Start Manual

Agile S NI 

- 10.1" Tablet PC 

Type B7-A2B.-.…/……..

Basic safety information 

Subject to technical changes. 

02/2020 

3/20 

1.3

Intended use 

1.3.1

Exclusive purpose 

The tablet PC

series is a handheld piece of electrical equipment. It serves the purpose of 

the mobile recording, processing and/or radio transmission of data within potentially 

explosive atmospheres. 
It is used exclusively in combination with devices which comply with the requirements 

placed on the overvoltage category I. 
The admissible operating data of the device used must be considered. 

1.3.2

Unintended use 

Any other use is unintended and may lead to damage and accidents. The manufacturer 

shall not be liable for any use extending beyond the exclusive purpose. 

1.4

Duties of the operator 

The operator undertakes to only permit persons to work with the tablet PC who 



are acquainted with the basic regulations on safety and accident prevention, and who 

have been inducted in the use of the tablet PC, 



have read and understood the documentation, the safety chapter and the warnings. 

The operator checks that the safety and accident prevention regulations applicable to the 

respective case of use have been observed. 

1.5

Safety information 



Do not dry wipe or clean devices in potentially explosive atmospheres! 



Do not open devices in potentially explosive atmospheres. 



Do not replace or charge battery in potentially explosive atmospheres.  



General statutory provisions or guidelines on occupational health and safety, accident 

prevention provisions and environmental protection laws must be heeded, e.g. 

Operational Safety Ordinance (BetrSichV) and nationally applicable ordinances. 



Use suitable clothing and shoes with respect to the danger of hazardous electrostatic 

charges. 



Avoid heat influences outside the specified temperature range. 



Protect device from external influences! Do not expose device to caustic/aggressive 

liquids, vapours or spray. In the case of malfunction or damaged enclosure, remove 

the device immediately from the potentially explosive atmosphere and bring it to a safe 

place.