Agile S and Agile S NI series
FAQ: PXE boot
FAQ
Subject to technical changes.
10/2020
4/9
2.
About
PXE
PXE = Preboot Execution Environment
The Agile S and Agile S NI series support the PXE boot mode.
The following instruction provides information about required equipment and BIOS setup.
3.
Notes to PXE
First, check that your PXE server supports UEFI or LEGACY or both.
This information is required for correct setup.
The settings on Agile S and Agile S NI series and your PXE server must be identical that PXE boot can work
correct.
4.
Required software and hardware
Agile S and Agile S NI series only support Ethernet and must use one of the following accessories to setup
and proceed PXE.
4.1
Required software
We recommend to use the latest available BIOS version for this devices.
The latest version is listed on BARTEC support & Download page.
https://automation.bartec.de/tabletpcE.htm
Select your product and go to section Driver. There you will find a Note what BIOS version is currently
available.
If you have an older version you can use the contact information on same page to request the latest BIOS
version.
Summary of Contents for Agile S Series
Page 2: ......
