Industry Tablet PC 10.1"
Agile X IS
Type 17-A1B*-****/********
Faults and troubleshooting
Subject to technical changes.
05/2017
EN 37/43
The GPS application
cannot find my location
Check
–
whether the GPS option is activated in the HotTab tool.
activated = orange / deactivated = white
–
whether other devices in the area are generating
interference. Remove the Tablet PC from the range of
any such devices.
No sound is coming
from the loudspeakers
Check
–
the loudspeaker setting using the volume up and down
buttons.
No laser appears on the
1D/2D Imager and the
1D/2D Imager does not
seem to be working
Check
–
whether the 1D/2D Imager is active in the HotTab tool.
activated = orange / deactivated = white
–
whether COM15 is set in the system settings of the
1D/2D Imager, so that the HotTab tool has access.
The laser appears on the
1D/2D Imager,
but no data is displayed
Check
–
the distances between the 1D/2D Imagers and reduce
them (see chapter on decoding range).
–
whether the barcode type being used is activated in the
1D/2D Imager configuration.
8.2
Resetting the Tablet PC using the recovery function
ATTENTION
Data loss due to recovery!
First perform a complete backup to prevent any unwanted data losses.
It is important to be aware that any data saved on the Tablet PC which has not
been backed up will be deleted and cannot later be retrieved.
Work steps
1.
Switch the Tablet PC on using the "On/Off" button.
2.
Select one of the two options displayed when the boot screen appears to access
the recovery menu.
–
Press the
Fn1
button on the front of the Tablet PC.
–
If using an external USB keyboard, press the
F6
button
(only possible via the docking station).
