Ex p control unit
Motor purge controller
Safety
Rev. 0
01-37A2-7D0003_Operating instructions_MPC_20210923_0_en.docx
Page 11 of 96
2.3
Guarantee
WARNING
UNAUTHORIZED MODIFICATIONS AND/ OR CHANGES TO THE CONTROLLER.
The explosion protection, as well as the stress and safety-oriented
construction and production are no longer guaranteed.
Contact the manufacturer before making changes and modifications
and obtain written approval.
Only use original and replacement wear parts.
Assumption of guarantee services
The manufacturer assumes the full guarantee only and
exclusively for spare parts ordered from them.
In principle, our “General Terms and Conditions of Sale and Delivery” shall apply.
These are available to the operating company upon conclusion of the contract at
the latest. Warranty and liability claims for personal injury and property damage
are excluded, if these can be linked to one or more of the following causes:
Improper use of the control unit.
Improper assembly, commissioning, operation and maintenance of the
control unit.
Failure to observe the instructions in the manual regarding transport,
storage, assembly, commissioning, operation and maintenance.
Unauthorised structural changes to the control unit.
Inadequate monitoring of parts that are subject to wear.
Repairs having been carried out incorrectly
Disasters caused by the effects of foreign bodies and force majeure.
We grant a guarantee period of one year from the date of delivery to the Bad
Mergentheim plant on the APEX or SILAS control unit and its accessories.
This warranty covers all parts of the delivery and is limited to the free
replacement or repair of the defective parts in our Bad Mergentheim plant. For
this purpose, the packaging supplied must be kept where possible. Where
required, the goods must be sent to us after agreeing the same in writing. There
shall be no right to a rectification of defects at the place of installation.
