BCS3600
ex
series
Hand-held scanner and accessories
Configuration
Subject to technical changes.
April 2022 / Revision C
129/164
Operating modes
Detailed explanations and notes on the operating modes can be found in the Zebra user
manual.
Normal (Standard)
No batch data. The hand-held scanner attempts to transfer each scanned barcode.
Batch mode out of range
The hand-held scanner starts storing barcode data when it loses its connection to a remote
device (e.g. when a user holding the hand-held scanner goes out of range). The data
transfer is triggered by re-establishing the connection with the remote device (e.g. when a
user holding the hand-held scanner returns to range).
Standard Batch Mode
The hand-held scanner starts saving barcode data after the batch mode has been activated.
Data transmission is triggered by scanning transmission batch data.
Cradle Contact Batch Mode
The hand-held scanner starts saving barcode data when batch mode is activated. Data
transfer is initiated by inserting the hand-held scanner into the base station.
Batch Mode Only
The scanner radio is turned off and the scanner stores all barcode data. The data transfer
is triggered by inserting the scanner into the base station.
Batch Mode Parameters
When parameter batch mode is enabled and there is no connection to the base station, the
scanner starts saving parameter barcode data intended for the base station. The transfer
of the parameter barcode is triggered by inserting the scanner into the base station. The
Batch Mode parameter is exited at the end of the transfer. Alternatively, the dosing of
parameter barcodes can be aborted by scanning the output parameter batch mode before
inserting the scanner into the holder.
The parameter batch mode can be used when the base station and/or hand-held scanner
is configured with the radio turned off or the hand-held scanner is not connected to a base
station.
Summary of Contents for BCS3600ex Series
Page 1: ...Hand held scanner BCS3600ex series User Manual...
Page 2: ......
Page 4: ......
Page 173: ......
