BCS 36x8
ex
Connection to PLC
Technical changes reserved.
04/2019
5/10
2.
Connection to PLC
Compatibility with other components or systems:
BARTEC tested only the components described in chapter 3 of this document.
We expect that communication is in general possible with all other PLC and necessary communication
modules.
Detailed instructions can be found in the descriptions of the respective manufacturers.
BARTEC cannot give any further instructions for the processing of the data.
Further processing of the data is the responsibility of the operator.
3.
Sample Project for Siemens-Simatic S7-300
A sample project is available for a Siemens-SIMATIC S7-300 with CPU 315-2 PN/DP central processing unit
The project is available as a download on the BARTEC support download page.
http://automation.bartec.de/scannerE.htm
Data Capture
BCS3600ex Hand-Held Scanner Series
Programming
Sample for PLC Siemens SIMATIC S7-300 CPU315 2 PN/DP and CP340
The sample shows what is necessary to establish a connection and what settings are required.
Further information can be found in Siemens documentation.
https://support.industry.siemens.com/cs/document/99741983/sample-program-(standard-blocks-cp-340-cp-341)-
zxx21_01_ptp_com_cp34x-zip-for-step-7-(tia-portal)?dti=0&lc=en-DE
Siemens and TIA-Portal are registered trademarks.
