Commissioning
7" Industry Tablet
- Lumen X7
Type B7-A23.-2…/……..
EN 26/61
Subject to technical changes.
03/2016
5.4.3
Insert battery
DANGER
In potentially explosive atmospheres, battery latches must be locked.
Danger to life exists!
Check the locking of the battery latches carefully.
Work steps:
Only install or replace the battery outside the potentially explosive atmosphere.
1.
Disconnect any cables connected to the Industry Tablet.
2.
Place the Industry Tablet on its front (display facing downwards) on a flat mat.
3.
Insert the battery on the connector-pins side (c) first, and then lower the battery (d)
into the battery compartment. Continue to hold the battery latches (e) before the
battery is fully inserted.
Make sure the battery is completely lowered into the compartment before letting go
the battery latches (e). The battery will be flat against the housing once it is fully
inserted.
5.4.4
Charge battery
DANGER
Non-certified accessories endanger explosion protection.
Danger to life exists!
Use only the adapter included with the Industry Tablet. Using other adapters may
damage the Industry Tablet and the battery.
The Industry Tablet operates either on external adapter or internal battery power. To
connect the Industry Tablet to the power supply, the protective I/O cover must be
removed.
Work steps:
1.
Plug the adapter into the Power Jack of the Industry tablet.
2.
Plug the adapter power cable into the electrical outlet. As soon as the adapter is
connected with the outlet, the battery will be charged. The battery LED display (see
chapter 2.2 "Structure") at the Industry Tablet changes.
Summary of Contents for Lumen X7 B7-A23.-2 SERIES
Page 2: ......
Page 6: ...empty...
