background image

Quick Start 

Guide 

7" Industry Tablet 

- Lumen  X7 

Type B7-A23.-2…/……..

 

 

Subject to technical changes. 

06/2016 

EN   9/12

 

 

 

8.

 

Charge the Battery 

 

The battery in the new Lumen X7 is not charged yet. Please 

charge with the bundled adapter cable before your first use. 

The Industry Tablet operates either on external adapter or 

internal battery power. To connect the Industry Tablet to the 

power supply, the protective I/O cover must be opened. 

 

 

Do not replace or charge the battery in a potentially 

explosive atmosphere.  

Only use original accessories from BARTEC.  

Our warranty does not cover damage to the Lumen 

X7 caused by other batteries and/or chargers. 

Additional  safety instructions for use  in potentially 

explosive atmospheres, see user manual. 

 

 

Note:

  The actual life of a battery is influenced by different 

factors, e.g. hot, cold, rough operating environment 

and falling from a great height. Batteries kept for a 

duration of six months or longer should be charged 

and discharged again at least every three months.

 

Please don’t remove the battery pack or try to take 

the Industry tablet apart while the Lumen X7 is 

charging. These actions will result in some damages 

and may invalidate your warranty.

 

 

Summary of Contents for Lumen X7B7-A23-2 SERIES



















Reviews: