GPS-Receiver (RS 232) type 6722-18
140
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
24.1.1
Wiring of GPS receiver 6722-18
See Compact Controller wiring page 14.
24.1.2
Connection
5 m length of cable supplied with the product, 130 mm of insulation stripped
from cable end.
Assignment:
Signal
+ DC 24 V
GND/Remote
RxD
TxD
Colour
Red
Black/yellow
Blue
White
24.1.3
Fitting
The aerial is built into the receiver therefore the receiver must be fitted on
top of the vehicle (e.g. on the rear cabin) and must be as horizontal as pos-
sible. The unit must never be covered by metal parts and must be able to
"see" as well as possible in all directions on all sides.
