Start of operation
195
Measuring System MAK TIGER 3003 Service manual, SA 131128, 10.03.2020
27
Start of operation
27.1
Process and instructions
The MAK Tiger 3003 operating instructions and the configuration instructions
are constituent parts of this manual. Strict adherence to all these instructions
is required.
The basic procedure for starting up the system is as follows:
1. Check that the entire system is wired correctly before switching on the wir-
ing system voltage.
2. Set all the parameters on the Controller. The menu structure of the config-
uration instructions can be followed. It is not absolutely necessary to follow
the order but all the menu items should be completed. The configuration
instructions cover the individual menus, including their meaning and pos-
sible settings, and they also cover the assignment and meaning of the in-
puts, outputs and vehicle-specific settings.
Note:
After start of operation, it is advisable to print out the parameter settings (to
file with your vehicle documents).
