Mobile Computer
MC 75Ax
ex
-NI and MC 75A6
ex
HF-NI
Type B7-A27.-…………
Commissioning
Subject to technical changes.
04/2015
33/58
5.4.9
Remove SAM card (MC 75A6
ex
HF-NI only)
Work steps
1.
Only remove the SAM card outside the potentially explosive atmosphere.
2.
Press the red “ON/OFF” button to switch off the Mobile Computer.
3.
Remove the four screws of the cover plate/RFID antenna using a torx (T5)
screwdriver.
4.
Lift RFID antenna from the reverse side of the enclosure and remove.
5.
Open the cover of the SAM card and remove the SAM card.
6.
Close the cover of the SAM card.
7.
Click-in the RFID antenna on the reverse side of the enclosure.
8.
Tighten the four screws using a torx (T5) screwdriver.
9.
Perform warm boot.
Summary of Contents for MC 75A6exHF-NI
