background image

Basic safety information 

MC93

ex

-NI 

- Mobile Computer 

Type B7-A2M*-****/**** 

 

2/40 

 

Subject to technical changes. 

10/2020 

 

 

1.1.1

 

Languages 

The  original  Quick  Start  Guide  is  written  in  German.  All  other  available  languages  are 
translations of the original Quick Start Guide. 
The Quick Start Guide is available in German and English. If further languages are required, 
these must be requested from BARTEC or stated on placing an order. 

1.1.2

 

Changes in the document 

BARTEC reserves the right to change the content of this document without notification. No 
warranty is assumed for the correctness of the information. In cases of doubt, the German 
safety instructions apply because it is not possible to rule out errors of translation or printing. 
In  the  case  of  legal  disputes,  the  “General  Terms  and  Conditions  of  Business”  of  the 
BARTEC Group also apply. 
The current versions of the datasheets, certificates and EU declarations of conformity can 
be downloaded fro

www.bartec.com

 or may be requested directly from BARTEC GmbH. 

1.1.3

 

Registered trademarks 

Bluetooth®     is a registered trademark of Bluetooth Special Interest Group 
Android 

  The "Android" name, the Android logo, the Google Play trademark and 

other Google trademarks are the property of Google LLC. 

WiFi 

  is  a  registered  trademark  of  Wi-Fi-Alliance,  an  association  of 

manufacturers founded in 1999. 

1.2

 

Handling the product 

The product described in this Quick Start Guide left the factory in a perfect and tested state 
in terms of safety. To maintain this state and to achieve a perfect and safe operation of this 
product, it may only be operated in the manner described by the manufacturer. In addition, 
the perfect and safe operation of this product requires correct transportation, proper storage 
and careful operation. 
The safe and perfect handling of the Mobile Computer is a prerequisite for its perfect and 
correct functioning. 
 

 

Summary of Contents for MC93ex-NI

















































Reviews: