Operation and Installation Manual PBTC-200
21-54C3-7D0001/-
04/2021-EHT-441168
Notice:
Technical data subject to change without notice.
No claims for damage arising from alternations, errors or misprints shall be allowed.
Page 2 / 45
1
About this Manual
1.1
Product Safety
The junction box with electronic thermostat module PBTC is designed and approved for use in hazardous areas. It is built according
to the state of the art and is safe to use. To ensure safe operation, it is essential to plan the system accurately, transport it properly,
install it professionally, and to commission and maintain it. The necessary personal protective equipment (PPE) must be worn when
working on the product or on the system in which it is installed.
The junction boxes with electronic thermostat module PBTC may only be operated and used in accordance with their intended pur-
pose and in compliance with these operating instructions and the applicable national standards and approvals.
WARNING
Injuries due to misuse
Improper use of the product can lead to an explosion, serious injury or death. The warnings and instructions must be
read and understood.
1.2
How to use the Operating and Installation Instructions
This manual is part of the junction box with electronic thermostat module PBTC. It is intended for safe and efficient handling of the
product. The manual must be kept for future reference and kept close to the PBTC electronic thermostat module junction box so that
it is always available to all personnel involved.
Read these instructions carefully and completely before working with the product. The contents of the manual must be read and
understood thoroughly before installing, commissioning, using or maintaining the product. This manual must be passed on to future
owners or operators if necessary.
The safety notes and instructions in this manual and in the documents provided are a requirement for safe working and must be
observed. The technical data and applicable standards must be observed.
The illustrations in this manual are for basic understanding and may differ from the actual design
1.3
Symbols and Signs
The Warning signs warn of dangerous situations. They are intended to protect against personal injury and damage to property.
In the operating instructions, the severity of the possible dangers is indicated by the following signal words:
DANGER
DANGER draws attention to a danger, which will lead to death or serious injury if not avoided.
WARNING
WARNING draws attention to a danger, which can lead to death or serious injury if not avoided.
CAUTION
CAUTION draws attention to a danger, which can lead to minor or moderate injury if not avoided.
NOTICE
Important instructions and information on effective, economical & environmentally compatible handling.
Reference to important information to which special attention is drawn:
Disposal
The device must be disposed of properly in accordance with the local laws and regulations for electrical and
electronic equipment.
The device must not be disposed of with household waste.
Summary of Contents for PBTC-200
Page 2: ......
