Installation
POLARIS REMOTE
- for Zone 1/21
POLARIS Remote KVM Analog 15" / 19.1"
EN 20/48
Technical data subject to change.
08/2019
DANGER
If there is no reinforcement frame, it will not be possible to maintain the
IP protection. There is a risk of fatal injury in an explosive atmosphere!
Only use enclosure with at least 2 mm wall thickness.
Insert the reinforcement frame between the holder and the enclosure.
Reinforcement frame for maintenance of protection class IP65
POLARIS 15″
05-0205-0009
POLARIS 19.1″
05-0205-0010
Fit the reinforcement frame
Illustration 6: Fixing reinforcement frame with mounting clamps to POLARIS
Work steps
(1)
Insert the POLARIS into the cut-out in the enclosure.
(2)
From the back, place the reinforcement frame over the POLARIS.
(3)
Using the M4x12 (2) screws to fasten the mounting clamps (1) to the rear side of
the POLARIS and tighten to 1.37 Nm.
(4)
Tighten the clamping screw (3) of the mounting clamps in the order
to
to a torque of 1.02 Nm.
Number of mouting clamps
POLARIS 15″
12 pieces
POLARIS 19.1″
Always tighten the mounting clamps crosswise.
