POLARIS REMOTE
- for Zone 1/21
POLARIS Remote KVM Analog 15" / 19.1"
Installation
Technical data subject to change.
08/2019
EN 31/48
6.8
Local unit for STP cable
The local unit is used in connection with the POLARIS Remote KVM Analog.
Please read the enclosed manufacturer’s manual and also observe the warnings given
by the manufacturer.
6.8.1
Technical data of local unit
Enclosure
Aluminium anodised
Dimensions
ca. 198 x 111 x 50 mm (length x breadth x height)
Max. ambient temperature
0 °C to +45 °C
Weight
ca. 600 g
Maximum line length
300 m
Power supply
From PC via PS/2 keyboard
Alternatively external power pack, see Accessories
Video
VGA ... UXGA, RGB without Plug & Play support (at 1280
x 1024 up to 300 m)
Keyboard / mouse
Standard PS/2, alternatively USB/PS2-Adapter, see
Accessories
Serial
To connect the touch screen (necessary to install a driver)
6.8.2
Properties of local unit
Keyboard and mouse emulation for Plug & Play functionality. The PC boots under all
conceivable circumstances. The Plug & Play initialisation of keyboard and mouse is
guaranteed in the same way (length up to 300 m). A length adjustment using the
keyboard is necessary.
6.8.3
Compatibility
In order to use the hardware of a broad variety of manufacturers in different environments,
this product has a number of different functions and has been tested with a large number
of different devices. Nevertheless, it is impossible to guarantee correct function with every
keyboard/mouse/monitor and every mother board on the market.
6.8.4
Connection of STP cable
The connection between the POLARIS Remote KVM Analog and the local unit is made
using a CAT 7 cable.
Requirements placed on CAT 7 cable:
The cables must be twisted and shielded EIA/TIA-568 B (usual) in pairs!
Recommended cable: LAN STP cable CAT.7 4x2x23 AWG, see accessories.
