POLARIS PROFESSIONAL
- for Zone 1/21
POLARIS Panel PC Professional 15" up to 24"
Basic
safety instructions
Technical data subject to change.
04/2019
EN 3/68
1.3.2
Unintended use
Any other use is not in accordance with the intended purpose and can cause damage
and accidents. The manufacturer will not be liable for any use beyond that of its
"Exclusive II" intended purpose.
1.4
Duties of the operator
The owner/managing operator undertakes to restrict permission to work with the
POLARIS to people who:
are familiar with the basic regulations on safety and accident prevention and have
been instructed in the use of the POLARIS;
have read and understood the documentation, the chapter on safety and the
warnings.
The owner/managing operator must check that the safety regulations and accident
prevention rules valid for the respective application are being observed.
1.5
Safety information
1.5.1
General
Take the device out of the hazardous area before wiping it with a dry cloth or
cleaning it!
Do not open devices in a hazardous area.
The general statutory regulations or directives relating to safety at work, accident
prevention and environmental protection legislation must be observed, e.g. the
German industrial health and safety ordinance (BetrSichV) or the applicable
national ordinances.
In view of the risk of dangerous electrostatic charging, wear appropriate clothing
and footwear.
Avoid the influence of heat that is higher or lower than the specified temperature
range.
Protect the device from external influences! Do not expose the device to any
caustic/aggressive liquids, vapours or mist! In the event of malfunctioning or
damage to the enclosure, take the device out of the potentially explosive area
immediately and bring it to a safe place.
1.6
General safety information for operation
1.6.1
Maintenance
The pertinent erection and operating provisions for electrical systems must be observed!
(e.g. Directive RL 2014/34/EU, BetrSichV and nationally applicable ordinances EN
60079-14, IEC 60079-14 and the series DIN VDE 0100)!
Observe the national waste disposal regulations when disposing of materials.
